Ensure surfaces are clean, dry, and free of dirt, dust and grime using Geocel Surface Cleaner or a suitable solvent and an oil and lint-free cloth. Areas adjacent to the joint should be masked with tape to prevent contamination of substrates and ensure a neat sealant line.
Replace the nozzle and cut the tip to the required width at a 45-degree angle. Ensure the adhesive/sealant makes full contact with both sides of the joint. Cut the cartridge nozzle at an angle to ease control of the sealant flow. The nozzle should be cut according to the width of the joint. As the sealant extrudes from the cartridge, draw the cartridge towards you along the joint.
Clean up using a suitable solvent